REVIEW PAPER ON RELIABILITY ANALYSIS OF HIGH RISE BUILDING
Keywords:
Reliability Analysis, EPS, AAC, Foam ConcreteAbstract
Reliability is the ability of a structure to comply with given requirements under specified conditions during the intended life for which it was designed [ISO2394:2015]. The design and execution of a structure should be done in such a way that it will be reliable and shall remain fit for use by people during its proposed period and sustains all actions and influences likely to occur during execution and use. Study of different materials like Expanded Polystyrene (EPS), Foam Concrete and Autoclaved Aerated Concrete (AAC Blocks) which are used for wall structure is done.
References
CSIR-CBRI, 2017, Manual for Expanded Polystyrene (EPS) Core Panel System and its field Application.
Lim, O.Y., 2012. Engineering Properties of Lightweight Foamed Concrete Incorporated With Palm Oil Fuel Ash (POFA) (Doctoral dissertation, UTAR).
Andolsun, S.İ.M.G.E., 2006. A study on material properties of autoclaved aerated concrete (AAC) and its complementary wall elements: their compatibility in contemporary and historical wall sections. MS unpublished thesis, Department of Architecture. Middle East Technical University.
Naji, S., Çelik, O.C., Alengaram, U.J., Jumaat, M.Z. and Shamshirband, S., 2014. Structure, energy and cost efficiency evaluation of three different lightweight construction systems used in low-rise residential buildings. Energy and buildings, 84, pp.727-739.
Liu, M.Y. and Li, Y.J., 2012. Reliability analysis of high-rise buildings under wind loads.
Liu, M., 2012. Reliability Analysis of Seismic Shear-Type Structures. In Software Engineering and Knowledge Engineering: Theory and Practice (pp. 181-187). Springer, Berlin, Heidelberg.
Kabir, M.Z. and Kosarieh, A.H., Inelastic seismic performance of concrete precast 3d panel system with discontinuous shear walls supported on rc frames. In The 14th World Conference on Earthquake Engineering October (pp. 12-17).
Lu, D.G., Song, P.Y., Yu, X.H. and Wang, G.Y., 2008, October. Global seismic reliability analysis of building structures based on system-level limit states. In Proceedings of the 14th World Conference on Earthquake Engineering.
Krishna G.V. and Kumar, R., 2018. Issues In Design Of Tall Concrete Buildings In India With Reference To Is 16700: 2017 Code. In International Conference on Advances in Construction Materials and Structures (ACMS-2018) , March 7-8, 2018.
Padade, A.H. and Mandal, J.N., 2012. Behavior of expanded polystyrene (EPS) geofoam under triaxial loading conditions. Electronic Journal of Geotechnical Engineering, 17, pp.2542-2553.
Di Sarno, L. and Wyatt, T.A., 2006. High rise steel buildings under wind loads. In XI International Conference on Metal Structures (ICMS-2006) (pp. 362-364). Taylor &Francis Group.
Lee, J.H., Hong, S.G. and Ha, Y.J., 2017. Sandwich panels of ultra-high performance concrete composite with expanded polystyrene. Journal of Asian Concrete Federation, 3(2), pp.90-97.
Gangwar, A.G., Affordable Housing: Emerging Technologies and Building Materials in Indian Context..
Gitau, N.S., 2014. DEPARTMENT OF CIVIL AND CONSTRUCTION ENGINEERING (Doctoral dissertation, UNIVERSITY OF NAIROBI).
Einea, A., Salmon, D.C., Fogarasi, G.J., Culp, T.D. and Tadros, M.K., 1991. State-of the-art of precast concrete sandwich panels. PCI JOURNAL, 36(6), pp.78-98.
Salmon, D.С., Fogarasi, G.J., Culp, T.D. and Tadros, M.K., State-of-the-Art of Precast Concrete Sandwich Panel
Additional Files
Published
How to Cite
Issue
Section
License
Copyright (c) 2018 International Educational Journal of Science and Engineering
This work is licensed under a Creative Commons Attribution 4.0 International License.
