ANALYSIS AND DESIGN OF MULTISTOREY CAR PARKING BUILDING USING ETABS SOFTWARE

Authors

  • Tirth Narayan Yadav UG Student, Civil Engineering Dept, Sri Krishna Institute of Technology, Bengaluru, India
  • Sahil Kumar Gupta UG Student, Civil Engineering Dept, Sri Krishna Institute of Technology, Bengaluru, India
  • Geetha C UG Student, Civil Engineering Dept, Sri Krishna Institute of Technology, Bengaluru, India
  • Madan R UG Student, Civil Engineering Dept, Sri Krishna Institute of Technology, Bengaluru, India
  • Mohan K T Assistant Professor, Civil Engineering Dept, Sri Krishna Institute of Technology, Bengaluru, India

Keywords:

ETABS, Multistorey Parking, Structural Analysis, Seismic Analysis, Storey Drift, RCC Structure

Abstract

Rapid urbanization and increasing vehicle ownership in metropolitan cities have created severe parking shortages, especially in densely populated commercial areas. Multistorey car parking structures provide an effective solution for efficient land utilization and traffic management. This study focuses on the analysis and design of a G+9 multistorey reinforced concrete car parking and commercial building using ETABS software. The structure was modeled and analyzed under dead load, live load, wall load, wind load, and seismic load conditions as per IS 456:2000, IS 875, and IS 1893:2016. Structural response parameters such as storey drift, displacement, base shear, overturning moment, shear force, bending moment, and axial force were evaluated. Results indicate that the proposed structure satisfies stability, strength, and serviceability requirements within permissible code limits. The study also demonstrates the effectiveness of ETABS in analyzing complex multistorey structures with ramps and mixed-use occupancy. The proposed parking facility offers an economical and sustainable solution for urban parking demands.

References

I. Sharma, R. K., Gupta, N., & Verma, A. (2024). Analysis and Design of Multi-Storey Building Using ETABS. International Journal of Scientific Research in Engineering and Management, 8(2), 112–118.

II. Kulkarni, P. S., Patil, R. M., & Shinde, V. S. (2024). Analysis of Multi-Level Car Parking Building Using ETABS. International Journal of Advanced Research in Civil Engineering, 6(3), 89–95.

III. Rao, A. K., & Reddy, S. N. (2023). Analysis and Design of Multistorey Commercial Building Using ETABS. International Journal of Engineering Sciences & Research Technology, 12(8), 150–156.

IV. Ahmed, M. A., & Ali, S. O. (2022). Analysis and Design of a Multi-Storied Car Park Concrete Structure. International Journal of Civil Engineering Research, 10(1), 45–52.

V. Patil, S. R., Deshmukh, A. B., & Jadhav, P. R. (2020). Design and Analysis of Multi-Storied Car Parking Building (G+2). International Journal of Engineering Research and Technology, 9(6), 245–250.

Additional Files

Published

01-06-2026

How to Cite

Tirth Narayan Yadav, Sahil Kumar Gupta, Geetha C, Madan R, & Mohan K T. (2026). ANALYSIS AND DESIGN OF MULTISTOREY CAR PARKING BUILDING USING ETABS SOFTWARE . International Educational Journal of Science and Engineering, 9(05), 436–441. Retrieved from https://iejse.com/journals/index.php/iejse/article/view/362

Issue

Vol. 9 No. 05 (2026): SPECIAL ISSUE MAY - NATIONAL CONFERENCE ON EMERGING TRENDS IN ENGINEERING, TECHNOLOGY AND MANAGEMENT

Section

Articles

License

Copyright (c) 2026 International Educational Journal of Science and Engineering

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.